Complete Ironing Test by tholey

tholey

3D Printer>Test Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1, PLA

Designer

1.3 h

1 plate

4.9(11)

P1S, Basic PLA

1.2 h

1 plate

4.9(8)

Boost

211

187

Released

Description

with printing this Ironing test you can find out the perfect settings for ironing. If there are little holes or you can see the lines of your upper layer the extrusion value is to low. If there are string on your layer, the extrusion is to high.

For big surfaces check out this ironing test:

https://makerworld.com/en/models/427547#profileId-331469

Comment & Rating (29)

@TheKirklands

Very helpful! Thanks for taking the time to make this. Used basic black pla.

The designer has replied

@tho_le

Thanks for your comment. Im glad it could help you😊if you like you can leave some stars ✨⭐️

@TheKirklands

Replying to @tho_le :

I don't think I can since I ended up just importing your raw model file, sorry. Switching to P1S and Basic filament within your profile came up with way to many settings it was asking to transfer/save/discard, so I gave up. Your raw model worked great though!

@tho_le

Replying to @TheKirklands :

No problem😉

@marcelnic

Print Profile

A1, PLA

Eigentlich gut aber die Flächen sind zu klein oder es gibt einen anderen Faktor, da ich bei einem größeren Druck kurz danach zwar anfangs gute Ergebnisse hatte, sich das jedoch nach paar Minuten änderte. Aber gut um mal ein grobes Verständnis zu bekommen wenn man sich die dazugehörigen Einstellungen anschaut

The designer has replied

@tho_le

Hi, Ironing ist für grössere Flächen weniger geeignet. Habs auch lange ausprobiert aber nie ein perfektes Ergebnis erzielt. Entweder es passt an den Rändern nicht oder in der Fläche…

(Edited)

@tho_le

Hi, ich habe einen Ironing test für grosse Flächen hochgeladen. Vielleicht kann dir dieser weiterhelfen

(Edited)

@alboayal

Print Profile

A1, PLA

awsome, finally I LL be able to master the ironing art with my a1m.

@DanielBogdanoff

Print Profile

P1S, Basic PLA

great quick ironing test!

@Raybesh

Print Profile

A1, PLA

These are auch nice tests for ironing settings! I've added a little label at the top to remind my which nozzle I did the test with. also the top left quarter is usually very over extruded so you could speed up the test by just removing those ones.

@matthieuhiver

Hey I really need this to work but I dont understand what the millimeter values are for, there is no length I could put in as an ironing parameter. This is not ironing speed, is it? Then you would have labelled it mm/s, right? I need an answer fast :(

The designer has replied

@tho_le

Hey, the two values stand for extrusion and Speed. You‘re right, it should mean mm/s. Thanks for your comment. I will proof to fix it soon😊