Book Stack Earrings by Garber Creations

Garber Creations

Fashion>Earrings

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

4.9(8)

Boost

126

Released

Description

Check out my other Earrings!

Book stack dangle earrings.

I have printed without support, even though there is clearly overhangs between the books. There is a little sagging in the first layer of the top book as shown in the close up picture, but to me it is acceptable without the supports.

No special print settings.

.4mm nozzle

0.12mm fine settings

PLA filament pictured:

Inland Matte PLA - light pink (for the pages)

Bambu Labs PLA Basic - Purple

Duramic 3D PLA Plus - Red

PLA Max PLA+ - Grass Green

Enjoying my designs? Make a donation!

❤️Thank you to my lovely wife for being my earring model!❤️

Hook Earrings shown in picture (AMAZON LINK)

Please leave a comment and picture of your print!

I would love suggestions on what you would like to see more of.

Check out my Marvel Keychains!

Check out my DC Comics Keychains!

*Please do not sell, copy, remix or distribute this model.

Comment & Rating (15)

@Griffin49424

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

came out awesome

The designer has replied

@aggarber

Those came out really awesome! Thanks for sharing.

(Edited)

@Twinkletoes

Print Profile

0.12mm layer, 2 walls, 15% infill

came out awesome! I would love to see a keychain version where the books are vertical

The designer has replied

@aggarber

glad you liked it. Great idea on the keychain!

(Edited)

@aggarber

Just finished, tested and printed a keychain version. https://makerworld.com/en/models/406552#profileId-308522 My wife says it's too big, so you may want to scale it down.

(Edited)

@Shawn_standridg

Print Profile

0.12mm layer, 2 walls, 15% infill

the eyelets on top didn’t print very well since it was recommended you didn’t have to use supports, but decent otherwise.

The designer has replied

@aggarber

Thank you for your comment and your input. Would you be willing to upload a picture of your print? I had very slight sagging on the book overhangs without support, but no issues with the eyelets. I wonder what the difference could be?

@eoosting

Print Profile

0.12mm layer, 2 walls, 15% infill

lovely model

The designer has replied

@aggarber

Thank you for your comment! I'm glad you enjoyed.

@Imgoodbeingme23

Print Profile

0.12mm layer, 2 walls, 15% infill

One of the cutest prints i have seen!

The designer has replied

@aggarber

Awesome! Thank you so much for the comment. I'm glad you enjoy them.

@user_4058062293

Hi, do you offer a commercial license for your models? I'm interested in selling prints.

@Allomancer

Print Profile

0.12mm layer, 2 walls, 15% infill

super cute set of earrings

@krzysztof.proch

Print Profile

0.12mm layer, 2 walls, 15% infill

@Captain_Kirk

Print Profile

0.12mm layer, 2 walls, 15% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.