Toolhead front housing cover - no logo by PRINT3DGIFTS

PRINT3DGIFTS

3D Printer>3D Printer Parts

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.8(10)

Boost

173

Released

Description

IMPORTANT!!

**UPDATE**

02-02-2024 - Added a No Logo version

This will print the best on an SLA printer because of the shape of the design and supports.
Printing it on your FDM printer will have not the nicest finish and requires post processing in most cases(sanding/smoothening/painting).
So only print this if you read and understand that it's a print that needs work afterwards.

BOM:
4mm x 2mm magnets (2*)

Comment & Rating (17)

@adooley1684

Print Profile

0.2mm layer, 2 walls, 15% infill

@threedee

glow in the dark is a brilliant idea

@ATC_OFFROAD_BMP

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed with Bambu PETG Basic Green on a Smooth High Temp plate, 0.4mm Nozzle, and 0.20 for the layer height and I ended up with a nice usable replacement front cover for my X1C with very minimal clean up or work after printing, NICE!

(Edited)

@BOORG

Print Profile

0.2mm layer, 2 walls, 15% infill

Saved the day! I messed up the cover on my printer, replacement is a week out, this got me printing again in a matter of hours!

@giusto.tommi

Print Profile

0.2mm layer, 2 walls, 15% infill

ok bello..

(Edited)

@silvatech

Thank-you, I have been needing this so I can add a blower of my own. I don't want to risk damaging the original.

@xMAJORx

what fan did you use?

@3DMik

whats the benefit of this part?

The designer has replied

@PRINT3DGIFTS

The benefit of this part is you can print it and with some post processing like sanding and painting you can have your cover in any color you want instead of buying a new front cover for 25 bucks :)

@user_324816160

I want to change the part fan. Can i have a step file please? I will upload my model as your remix.

@flustered

hi I am planning on fitting in a different stronger fan, except the stock fan has different geometry vs the fan i want to use. Would it be possible to upload the STEP file?