Wall Mounted or Free Standing Planter Pot
Wall Mounted or Free Standing Planter Pot
Boost
69
136
16
Print Profile(1)
0.2mm layer, 2 walls, 8% infill
Designer
4.7 h
2 plates
Boost
69
136
16
2
221
69
Released
Description
This planter can be wall mounted or free standing. Inspired by HendricksDesign but recreated by me on Fusion360 with my own character.
Size: 9x7cm, drainage holes 3mm diameter.
Wall mounted slider can be attached using a 3M Command Strip or a screw.
Comment & Rating (16)
All
Why does the free standing plate include a wall attachment piece?
The designer has replied
0
Reply
opps sorry! my mistake. just delete that piece.
0
Reply
Unfortunately, the lower bowl cannot be closed, the locks only bump into each other, but do not lock.
The designer has replied
1
Reply
they do lock when I print them? you have to position it correctly. might be fiddly initially
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
it wa vewy good
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
the initial print of this was not that great, had to adjust a some supports but in the end it turned out well
0
Reply
Rad! Thanks!
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld