Death from Above #4, fourth in a series of HueForge prints featuring hellish fiends terrorizing from the sky.

Printed with 0.4mm nozzle and 0.08mm layers

Minimum thickness.48mm 

Printed with Numakers PLA+

Filament used:

Numakers Pitch Black (#0E0E10)

Numakers Dark Grey (#52595D)

Numakers Light Grey (#8C969D)

Numakers Pure White (#F1ECE1)

Layer Swaps:

Start with Numakers Pitch Black

Swap to Numakers Dark Grey at layer 10

Swap to Numakers Light Grey at layer 15

Swap to Numakers Pure White at layer 21