Dust cover for USB, HDMI and DP by Makidev

Makidev

Hobby & DIY>Electronics

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

USB-A Cat - 0.2mm layer, 2 walls, 15% infill

Designer

14 min

1 plate

4.6(5)

USB-A short - 0.2mm layer, 2 walls, 15% infill

Designer

11 min

1 plate

5.0(3)

USB-A Cat short - 0.2mm layer, 2 walls, 15% infill

Designer

13 min

1 plate

5.0(2)

Display Port - 0.2mm layer, 2 walls, 15% infill

Designer

13 min

1 plate

5.0(2)

Click to see more

Boost

173

Released

Description

This is a dust cover for USB type A ports.

Note:

I would recommend printing it in its original orientation (upright) because printing it on it's side will make the thin wall very fragile.

UPDATES:
2024-02-11: I noticed in the makes pictures that my case's ports are deeper than some of your's, so I made “shorter” versions that are 5mm shorter.

Comment & Rating (21)

@Code_Craft

Print Profile

Display Port - 0.2mm layer, 2 walls, 15% infill

Great little covers.

@youwrote

Print Profile

USB-A - 0.2mm layer, 2 walls, 15% infill

Works as intended but one of the seams of the model rips when printed from this profile. The items still work though. .

@Kimyo

Print Profile

USB-A Cat - 0.2mm layer, 2 walls, 15% infill

I had some problems with the seams making it weak so the bottom layers separated. but overall they still work how I need them too, and I'm sure the seam problem is user error on my part.

@actoes93

Print Profile

HDMI - 0.2mm layer, 2 walls, 15% infill

fits like a good socks!

@actoes93

Print Profile

USB-A short - 0.2mm layer, 2 walls, 15% infill

fit well and perfectly!

@Alex.M

Boosted

Great model! I would suggest setting seam to be "random" to prevent the issues people have been reporting here. And set infill to 100%, as this is a tiny model, so it gives it a bit more weight.