Soporte universal rotatorio adaptable
Soporte para poner en baldas de 0 a 26 mm de ancho.
Distintas configuraciones para poner latas, botellas, base de telefono o una base con agujeros para tornillos M3-M4 y poder acoplar otros elementos
Tornillos de amarre para llave o atornillador punta phillips
Tiene giro de 360 grados, para poder inclinar lo que se necesite.
Se imprime de una vez, y debe de tener muy bien calibrado el flow de la impresora, para PLA flow al 92/94%, PETG al 88/92% , y unas temperaturas correctas
En caso de exceso de flow, puede aplicar una expansion horizontal de -0.05/-0.1 para conseguir el giro correcto.
Adaptable rotary universal bracket
Support to put on shelves from 0 to 26 mm wide.
Different configurations to put cans, bottles, telephone base or a base with holes for M3-M4 screws and to be able to attach other elements
Clamping screws for wrench or phillips tip screwdriver
It has 360 degree rotation, to be able to tilt what is needed.
It is printed at once, and the flow of the printer must be very well calibrated, for PLA flow at 92/94%, PETG at 88/92%, and correct temperatures
In case of excess flow, you can apply a horizontal expansion of -0.05 / -0.1 to get the correct turn.
Printer:
Two trees Sapphire Plus
Supports:
Yes
Resolution:
0.2
Infill:
10
Filament:Pla Fervi Esencial, Petg , Fervi Vertigo PLA-PETG the one you like
Category: Organization