Hello!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments used:

Sunlu PLA+ Black

Sunlu PLA Matte Red

Sunlu PLA+ Cherry Red

eSun PLA+ Bone White

Sunlu PLA+ White

Swap Instructions:

Start with Black

At layer 32 (2.64mm) swap to Matte Red

At layer 38 (3.12mm) swap to Cherry Red

At layer 41 (3.36mm) swap to Bone White

At layer 44 (3.60mm) swap to White for rest