Shinto Shrine (Daiwa or Inari torii) Headphone stand by 3DMakeryDE

3DMakeryDE

Miniatures>Architecture

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

8.1 h

4 plates

4.8(14)

For a1 mini 0.2mm layer, 2 walls, 15% infill

Designer

6.1 h

4 plates

5.0(5)

Boost

137

185

220

Released

Description

A japanese torii shrine. If my research is correct, it should be a Daiwa or Inari torii.

I use it as a headphone stand. But also looks nice standing on a shelf without headphones :)

The japanese character on the shrine means “peace”

If you want to have the sign print: "Shinto_middlepart_for_sign"

If not, you can use: “Shinto_middlepart_without_sign”

I designed it from scratch and tried to avoid that the first layer is visible after assembly (shiny surface and different from all other surfaces).

Comment & Rating (25)

@steve_82

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Absolutely wonderful! I scaled the model because it was too big for my purpose, but came out beautiful. The assembling was satisfying too :)

The designer has replied

@3DMakeryDe

Thank you :)

@themazeprinter

Print Profile

0.2mm layer, 2 walls, 15% infill

Beautiful ⛩️

(Edited)

The designer has replied

@3DMakeryDe

Thank you for your rating and sharing your print!

(Edited)

@shanehoggatt

Print Profile

0.2mm layer, 2 walls, 15% infill

absolutely beautiful model to print and build , super satisfying, I did the base in grey and fuzzy skin to give a stone/rocky/concrete apearence with a Herbert Curve top layer for some texture,

The designer has replied

@3DMakeryDe

Thank you so much :) And also thanks for sharing your print. Fuzzy skin on base is a great idea and looks awesome!

@Emoticon

Print Profile

For a1 mini 0.2mm layer, 2 walls, 15% infill

One of the tiny wedges went flying from my pei plate. Waiting on a new one to print with the placards. Tolerances are bang on. The way the strip that holds the black roof parts together slides on magically well. I did change the infill to gyroid. No adhesion issues.

(Edited)