Bambu Studio Settings:
The settings are just a recommendation, however you can print with the settings you are already used to using!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #7 (0.64mm) swap to Ice Blue
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #15 (1.28mm) swap to Green
At layer #17 (1.44mm) swap to BambuLab Green
At layer #22 (1.84mm) swap to Jade White for the rest.