Wolf Skull

brentglover1970
Art>Sculptures
Copyright Claim

Wolf Skull

brentglover1970
Boost
65
92
22

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
0.2mm layer, 2 walls, 10% infill with SUPPORTS
0.2mm layer, 2 walls, 10% infill with SUPPORTS
Designer
13.8 h
2 plates
4.8(13)
Boost
65
92
22
4
115
79
Released

Description

Scan of Wolf Skull from Natural Science Museum in Ciężkowice

 

Imported into Fusion 360, slightly retouched, split and supported - single colour.

The photos are totally as is. I just removed easily the supports - then dropped it! - no damage phew.

So no post processing performed as of yet.

 

-----------------------------------------------------------------------

 

1966, Jastrzębia (Tarnowski district)
Natural History Museum Krystyna et Włodzimierz Tomek in Więcwice
The presented object is the skull of a wolf (Canis lupus L. 1758) - a predatory mammal from the dog family (Canidae), inhabiting the forests and mountains of Eurasia and North America.

The specimen was obtained in 1966 in Jastrzębia in the Gromnik forest district by Władysław Rytel. The skull was prepared by Dr. Włodzimierz Tomek.

 

Original Skull:

 

Printed Skull:

wolf
skull
animal
museum

Comment & Rating (22)

Please fill in your opinion
(0/5000)
level
@Helen_of_Troy
Boosted
this skull is impressive in detail. favorite print so far
The designer has replied
0
Reply
level
@brentglover1970
Brilliant looking print - Did you airbrush or wash the aged brown effect? - Puts mine to shame :) and thank you very much for the boost!
0
Reply
level
@Helen_of_Troy
Boosted
Replying to @brentglover1970 :
yes, I used a mix of airbrush and washes to create the bone effect. also coated the teeth with clar UV resin to give it the enamel look.
0
Reply
level
@faithfulvein
Print Profile
0.2mm layer, 2 walls, 10% infill with SUPPORTS
Super cool model. Appreciate you sharing.
The designer has replied
0
Reply
level
@brentglover1970
wowo crazy colour - looks good!
0
Reply
level
@BiggumsChungus
Print Profile
0.2mm layer, 2 walls, 10% infill with SUPPORTS
no cleanup yet besides removing most of the support material(haven't gotten the last little bits yet) printed perfectly in inland bone white
(Edited)
The designer has replied
0
Reply
level
@brentglover1970
@BiggumsChungus That is a tidy print there - can barely see layer lines at all! Inland bone-white PLA - shame its one for the USA - cant seem to see it here in Europe or I would get my hands on that - I have a snapping turtle skull, alligator and Sabre tooth tiger to work on still
0
Reply
level
@brentglover1970
I added a Chimpanzee Skull if anyone is interested https://makerworld.com/en/models/172215
1
Reply
level
@user_2869696990
nice one
0
Reply
level
@beamr39
Print Profile
0.2mm layer, 2 walls, 10% infill with SUPPORTS
Great print Came out perfectly. Thankyou
The designer has replied
1
Reply
level
@brentglover1970
Thanks for your rating - glad you liked it!!
0
Reply
level
@user_445822781
Print Profile
0.2mm layer, 2 walls, 10% infill with SUPPORTS
toll als Dekoration
0
Reply
level
@user_2869696990
thanks for sharing it came out great.
0
Reply
level
@user_661549024
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill with SUPPORTS
great print, supports were a little rough to get off
0
Reply
level
@US1982
Print Profile
0.2mm layer, 2 walls, 10% infill with SUPPORTS
Sehr gutes Ergebnis, nur das Support haftet noch etwas zu gut
0
Reply

License

This work is licensed under a
Creative Commons Public Domain

Related Models

Low poly skull planter

Low poly skull planter

Enique3d
2
160
187
Arrowhead Skull Pendant

Arrowhead Skull Pendant

Sevro
0
22
21
skull planter

skull planter

BigBrother
0
7
2
Can with Lid Skull

Can with Lid Skull

finleymeinengel
0
45
36
PrivacyTermsGuidelinesFAQCookie PolicyCookie Settings
© 2024 MakerWorld