我根据马里奥游戏中问号砖块的造型,制作了一款ITX机箱。
它支持ITX主板、48mm以内的CPU散热器、双槽全高的显卡,以及Flex电源。
我对机箱六个面全部做了拆分和减重,最大程度降低了打印难度和耗材的消耗!
I used a large language model to help me translate the project instructions, and there may be translation errors. Please excuse me.
I made an ITX chassis based on the shape of the question block in the Mario game.
It supports ITX motherboards, CPU coolers within 48mm, dual-slot full-height graphics cards, and Flex power supplies.
I disassembled and reduced the weight of all six sides of the chassis to minimize the difficulty of printing and the consumption of consumables!
机箱兼容性:
机箱外尺寸218.4×208.4×198.4mm(9L,含问号)
ITX主板(170×170mm)
散热器限高48mm
双槽全高PCI位
显卡限长183mm(使用"问号砖块机箱_正面_显卡不限长.stl"替换机箱正面可以不限显卡长度,但会变丑)
Flex电源
5cm机箱风扇位1个
12mm开机按钮(开机线)
PCIe转向卡搜索关键词:PCIe转向卡 SKTC A09
所需的五金配件:
M3×10沉头内六角自攻螺丝(机箱各个面连接用)
M3×12沉头内六角自攻螺丝(机箱各个面连接用)
M3×14沉头内六角自攻螺丝(机箱各个面连接用)
M3×14沉头十字平尾自攻螺丝(机箱各个面连接用,隐藏螺丝)
M3×8大扁平头十字自攻螺丝(固定主板用)
M3×5×7圆头带垫十字螺丝(PCI位用)
M3×4×5铜嵌件螺母(PCI位用)
可选的五金配件:
M4×30×8扁平头十字螺丝(固定机箱风扇用)
M4六角螺母(固定机箱风扇用)
Chassis Compatibility:
External dimensions of the chassis: 218.4×208.4×198.4mm (9L, including the question mark)
ITX motherboard (170×170mm)
Maximum height of the cooler: 48mm
Dual-slot full-height PCI slot
Maximum length of the graphics card: 183mm (By replacing the front panel of the chassis with "问号砖块机箱_正面_显卡不限长.stl", there will be no limit on the length of the graphics card, but it may look less aesthetically pleasing)
Flex power supply
1× 5cm chassis fan slot
12mm power button (power cable)
Required hardware fittings:
M3×10 flush cup head socket cap screws (for connecting various sides of the chassis)
M3×12 flush cup head socket cap screws (for connecting various sides of the chassis)
M3×14 flush cup head socket cap screws (for connecting various sides of the chassis)
M3×14 flush cross recessed flat point self-tapping screws (for connecting various sides of the chassis, for concealed screws)
M3×8 large flat head cross recessed self-tapping screws (for fixing the motherboard)
M3×5×7 round head with washer cross recessed screws (for PCI slots)
M3×4×5 copper inserts nuts (for PCI slots)
Optional hardware fittings:
M4×30×8 flat head cross recessed screws (for securing chassis fans)
M4 hex nuts (for securing chassis fans)
组装视频(Assembly demonstration):