Here you have my new Slytherin symbol made on Hueforge!
It's ready to be printed, you don't need to select anything.
Please rate it and follow me, it makes me grow!
However, if you prefer:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
Black
Light Green
Dark green
Yellow
Swap Instructions:
Start with Black
At layer #6 (0.6mm) swap to Light Green
At layer #11 (1mm) swap to Dark Green
At layer #18 (1.56mm) swap to Yellow for the rest.