Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Orange Transmission Distance: 10
PLA White Transmission Distance: 5
PLA Gray Transmission Distance: 3
PLA Orange Transmission Distance: 10
PLA White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Orange
At layer #15 (1.28mm) swap to Jade White
At layer #17 (1.44mm) swap to Blue Gray
At layer #22 (1.84mm) swap to Orange
At layer #28 (2.32mm) swap to White for the rest.
Frame for the picture:
https://makerworld.com/en/models/209367#profileId-229295