Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Eryone Black Transmission Distance: 0.4
PLA Eryone Red Transmission Distance: 12
PLA Eryone Gray Transmission Distance: 2.2
PLA BambuLab Basic Orange Transmission Distance: 12
PLA Eryone Yellow Transmission Distance: 12
PLA Geeetech White Transmission Distance: 12
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #9 (0.8mm) swap to Gray
At layer #10 (0.88mm) swap to Orange
At layer #13 (1.12mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.