Art created on user request for Rocky Prattistic.
Plate 1 is set up for printing with AMS
Plate 2 has included pauses at the correct layer heights to swap colors manually. (Follow instructions below).
Optimized for 3D printing with a amazing depth of field.
Currently available in 150x150mm
For other dimensions. Upscale X and Y axis to desired dimensions and keep Z on the same height.
*Pictures can be printed with out AMS by following the print instructions below.*
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Glow Blue
PLA BambuLab Glow Yellow
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to PLA BambuLab Glow Blue
At layer #13 (1.12mm) swap to PLA BambuLab Glow Yellow for the rest.