Bottle organizer

*New model for bed 220x220 , six models. with pins diameter6 and dioameter1.5* *New model for only 7-8 drinks , 250 mm long*

Always have cold drinks, thanks to this dispenser, fill the dispenser with 10 units. (33 cl Diam 61 x 228 long)

The drink below is always the coldest, designed for the refrigerator.

Printing with 3 contours and 4 upper layers and 4 lower layers, 10% infill is sufficient

Model 3 pieces for bed 300 x 300 mm rotation 45 degrees. (2 complete models and one central)

The bolts are also printed for their union.

The design is prepared for a bottle with a diameter of 61 mm x 230 mm in height, it corresponds to a 33 cl glass bottle.

If you have other dimensions it is very easy to adapt it by scale.

For example, bottle with a diameter of 54/61 = 0.885 long X-axis scale (Y optional)

Length of 197/228 measurements = 0.864 Z scale.

So that you can make the design for any bottle, a photo is added with the formula to calculate the scale in your laminator. .

Print Settings

Printer:

Two trees Sapphire Plus

Rafts:

No

Supports:

No

Resolution:

200

Infill:

10

Filament:

Fervi Esencial -Fiberlogy Petg PLA-PETG

the one you like Post-Printing =============

Category: Kitchen & Dining