This is a 1:24 scale model of a neon lamp.

I created the model as lighting for a Carrera model garage.

The garage is from very nice model f Shane54 on Thingiverse (https://www.thingiverse.com/thing:3467763) or the original (https://www.thingiverse.com/thing:2736785) from from USNSCPO.

The model consists of two parts:

The lower part is the lamp body with an opening for cables.

The upper part is the "lamp glass" and should be printed in transparent material (e.g. PETG).

To illuminate the lamp I used LED string lights that I got from amazon. (I used Bxroiu 6x20LEDs 2032 string lights (warm white)

The model has the dimensions:

Assembled

Length: 6cm Width: 1.4 cm Height: 1.2 cm (L: 2.36 in, W: 0.55 in, H: 0.47 in

Bottom:

Length: 6cm Width: 1.4 cm Height: 0.6 cm (L: 2.36 in, W: 0.55 in, H: 0.23 in)

Glass:

Length: 6cm Width: 1.4 cm Height: 0.6 cm (L: 2.36 in, W: 0.55 in, H: 0.23 in)

I assume you can scale this model up or down but be aware of the cable opening that will also scale down or up.

Print parameter:

Printed with a 0.4 nozzle

Bottom material PLA:

3 wall loops, 15% infill, no support, no brim

Glass material PETG:

5 wall loops, 100% Monotonic infill, no support, no brim

I tried to make the glass as transparent as possible and tired to follow the advice of Stefan from CNC kitchen (https://www.youtube.com/@CNCKitchen) in https://youtu.be/9qb25Gi4Jv0?si=XUFbjT_5Naw-Bw93 but as you can see failed so far.

Start with a smooth print bed - not like me.

If you like this model please dontt forget to hit the „like“ button, if you printed it I would be curios to see your makes.

If you have questions - let me know in the comments.