A1 Mini Purge/Poop basket with bag support and logo Remixed by OLLESTORE

Remixed by

OLLESTORE

3D Printer>3D Printer Parts

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.28mm layer, 2 walls, 15% infill

Designer

47 min

1 plate

4.7(9)

0.16mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.5(2)

0.24mm layer, 2 walls, 15% infill

Designer

42 min

1 plate

Boost

103

Released

Description

A poop/purge basket designed for A1 Mini and A1. It was designed to be light weight

2 version

first one it require a paper/plastic bag to be attached via hooks to catch the purges-poop of the mini ( check picture below - profile1)

second version had a closed bottom part, so its similar to my the previous design but require no plastic bag ( profile 2)

This remix changes :

closer gap with the purge-launcher
added hooks for a plastic bag to catch the purges

for other models please check my profile or my Cult3D profile here : https://cults3d.com/en/users/OlleAdventures/3d-models

Comment & Rating (24)

@Roshi3Yuma

Print Profile

0.28mm layer, 2 walls, 15% infill

Carino, ma secondo me da rivedere un pochino ..durante il taglio viene spinto fuori e tende a uscire e anche qui il logo Bambu pare una S... lo spazio tra i 2 scivoli... è da rivedere... si infilano gli scarti tra le 2 parti e non sempre cadono giù...

The designer has replied

@OLLESTORE

thank you Roshi for the good feedback, i ll make sure to improve the distance , I ll be working on it now

(Edited)

@catalinmarincia

This is very nice! Can you please make one that uses no supports(you can use some 45* rotated squares for the holes) and also without the logo?

The designer has replied

@OLLESTORE

which printer you using as i didnt need to use supports to print this, i ll make a nologo version and add it in a couple of hours. thanks!

@catalinmarincia

Replying to @OLLESTORE :

I am using the A1 mini printer, it says that it requires supports for all the rectangular holes, for the bambu longo and some supports for the hole that conmects to the purge wiper.

@OLLESTORE

Replying to @catalinmarincia :

thank you for answering, im using the same printer successfully without supports :)) but ok ill try to fix them with tree supports now

@pcjegg

Print Profile

0.28mm layer, 2 walls, 15% infill

有一點間隙會卡住

@psinfie

Print Profile

0.16mm layer, 2 walls, 15% infill

could be a little bigger

The designer has replied

@OLLESTORE

find the larger version in my profile :)

@AndyF_CH

Print Profile

0.28mm layer, 2 walls, 15% infill

nice and smart! easy to print und work’s well!

@joeturczak

Print Profile

0.28mm layer, 2 walls, 15% infill

pretty nice design, but it keeps falling off, might need a little adjustment to the friction fit.

The designer has replied

@OLLESTORE

yes it may happen,just add a bit of paper tape ( blue tape or scoth) to create more friction on the attachment :) enjoy!

@williamandersen

i really love the design, but could you add a floor on the bottom? thank you william

The designer has replied

@OLLESTORE

thank you , added now the version with the bottom closed part. cheers

@naquio

Print Profile

0.28mm layer, 2 walls, 15% infill

Genial. Muy recomendable.

@joeturczak

I like your model, but I don't need the hooks, just want the poop to fall into my little bin. Can you put up a no hook version?? I would do it, but you don't allow derivatives and I am not going to break the rules.. I love the model though, the bag is a great idea..