Fit the divider into the large bottom draw/s of the Sealey Machinist Toolbox. To fit the internal draw measurements of 445mm x 178mm, each divided section is 36.8 mm x 31.8 mm. Print the file twice and rotate one part into position glueing the two parts together is optional as the draw holds the centre sections together.

The divider provides 55 spaces, designed to hold 4 full (4x 8 meters) embroidery floss on bobbins upright with colour codes visible on the tops. With total capacity of 220 bobbins per large draw. It is a very neat way to store all your coulours all you have to do then is decide how to organise, by rainbow or colour code? If you need to wind a large quantity of bobbins please look at my bobbin winder to reduce the workload of this job, more time sewing less time organising.

Not suitable for bead storage as bottom is open. I will be doing a 5 sided /bottom closed virsion, posibly with smaller sections for beading/jewellery.