I hated the mess it creates when filling the funnel of my Bialetti Brikka, so I made a scoup/leveler combo.
It's a two piece design, which uses magnets to keep it easily seperatable. There are six 5x2mm magnets needed. Just pause the print and insert them.
I only have a Bialetti Brikka, if you want me to make other versions, just tell me the diameter of the funnel and the volume of coffee needed!
Hot to use:
1. Fill the scouper up (it's the right volume for the mokka pot)
2. Attach the leveler to the funnel (trough the power of magnets)
3. Put the funnel on the leveler
4. Turn the whole thing around
5. Detach the scouper and turn the leveler until you have a flat bed of coffee. Very gentle taps can help to settle it all.
6. Resume making the coffee as always with your perfect level bed of coffee
I hope you like it! And if you encounter any problems, let me know!
If you want to buy me a coffe: https://paypal.me/kododo :)