This is a case designed to fit a BL Led Controller made by DutchDeveloper powered by a Bambu Power Tap made by 3dMachinist on Etsy. The led strip lights are connected to the case via a 6 position Deutsch DT connector.

Required materials

1: BL Led Controller

1: Bambu Power Tap

1: 6 Cavities Deutsch DT connector

1: 16 AWG wire(roughly 18in)

Required tools

Crimping to for the DT pins/sockets

Optional

Wire Ferrules

Heat Shrink
M3 X 6-8mm(used to trap the DT connector if loose)