Angel with Light Up Wings by PrintMint

PrintMint

Household>Decor

GIF

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

5.9 h

1 plate

5.0(5)

Updated 0.16mm layer, 2 walls, 15% infill

Designer

6.1 h

1 plate

4.5(2)

Boost

185

276

323

Released

Description

Remote operated LED Angel that has wings when lit up. I printed in PLA but most any filament will work.

Support me on Patreon if you like my work or want a commercial license.

Illuminate your Christmas with this Angel Wall Decor! This 3D printable angel model hangs effortlessly, adorned with two LEDs that cast enchanting wing-shaped patterns on your wall. Easy to print and hang, it brings celestial charm to your festive decorations. Simply print, assemble, hang, and let this angel light up your holidays!

I recommend printing in the orientation shown in the photo.

The LED kit for this is linked here: https://www.amazon.com/dp/B0C3LZR1FX?psc=1&ref=ppx_yo2ov_dt_b_product_details

Documentation (1)

Assembly Guide (1)

Angel Instructions.pdf

Comment & Rating (10)

@cap10hk

Awesome design! Thank you!

@mrd2k

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

@luca.cambianica

The print profile of the project also includes support for the head which should be removed.

@Min3R493r

Print Profile

0.16mm layer, 2 walls, 15% infill

didn't use profile provided but I'M sure that it would have printed fine with the settings provided I was able to cut the time in half using .2 layer height and reduce the support and make it bridge most of where the led box will sit and it turned out good The front profile would look good even with a higher layer setting then i used because of the way it was laid out on the print bed.