This piece is designed for the wall or as a table decoration and it lights up. Truly, something for everyone to enjoy! To finish and illuminate the picture/decoration, you'll need battery-powered lighting. Before printing, please review the printing instructions.
Printing Instructions:
The Halloween pumpkin picture is printed in multiple parts. The size is 20.5 cm with a thickness of 3.6 cm. The orientation for printing should be laid flat on the print bed. It's designed for printing without supports. The Halloween pumpkin picture is printed with a layer height of 0.2 and a 0.4 nozzle, with 100% linear infill and 2 perimeters. In the picture, I used color filament. The Halloween pumpkin picture needs to be assembled. All parts are numbered, and between each part, you need to insert a pumpkin/ring. You need to print 9 of these rings. The model can be proportionally resized, either enlarged or reduced!
If you encounter any issues or have suggestions, please leave a comment and let me know. If you like my models, don't forget to support me for my future creations!