This is mainly dedicated to FPS players and all those, who like light or well-balanced wireless mouse.
Super lightweight and easy to do adapter from AAA to AA!
Example:
Razer Pro Click Mini is probably the best mobile office wireless mouse for FPS games at this moment.
It weights 65g.
1x Eneloop AA weight 27g! Pro Click Mini use 2 batteries, so it gives 54g only for batteries! All weight 119g and most of it is located under middle of the palm. It is too heavy for FPS which require quick reaction and middle of gravity is too far back, especially for fingertip grip and soft claw grip.
Pro Click Mini is one of those which working too without one battery so we dismantle one of them. I recommend remove that on left side, but it's the best to try both options.
1x Everactive AAA weight 13 grams + 1x my adapter which weights ... 0,39g.
After installation 1x AAA with my adapter mouse weights 51 grams less than original configuration !!!
More upgrades coming soon !
Printer Brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0,12
Filament:
Notes:
REMEMBER! You have to rotate model from STL about 180 degree :)
SETTINGS:
CHANGE PRESENT SETTING:
It doesn't need supports, but if for some reason you'll have problems with 53th layer set:
At the end find paperclip and cut off 7 mm. I'm using that paperclips which have 0,75 mm diameter wire. If you can't measure just find paperclip that have about 30 mm total lenght :) If you think it's important, theoretically hole in the model has 1,4 mm diameter, but remember that in reality diameter turn out to be tighter ;)