A Star Wars “Rebel Est. 1977” light box designed in Fusion 360. There is the main body which is printed face down at a .2 layer height, then the back panel which is printed face up at the same layer height. The back panel has two cutouts for the USB-C connected to power the internal LEDS as well as a switch to turn the lights on and off. Links for the USB-C connector, Switch, and LEDS I used are below.

USB-C Connector: Amazon.com: DWEII 10PCS Type-C Female Chassis Waterproof 2P Solder Wire Type USB C Pigtail Cable Extension Power Cable USB-C Plug to 2 Pin Bare Wire Open End Connector : Electronics

Micro Switch:Tnuocke 100PCS 5mm High Knob Vertical Micro Mini Slide Switchs,3 Pin 2 Position SPDT Latching Toggle Switches Panel Mount DC 50V 0.5A SS12F15-G5: Amazon.com: Industrial & Scientific

LEDs:Amazon.com: Aclorol COB LED Strip Lights for TV 5V USB Powered Warm White 6.56FT 320Leds/M COB Flexible Light Strip TV Led Backlight for Bedroom Under Cabinet Kitchen DIY Lighting Project 3000K CRI85+ 2M : Tools & Home Improvement