Modular Mosspole 40MM for all your climbing houseplants (Fill with sphagnum mos)
Modular Mosspole 40MM for all your climbing houseplants (Fill with sphagnum mos)
Boost
95
180
30
Print Profile(5)
Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill
Designer
4.4 h
1 plate
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Designer
5 h
1 plate
0.16mm layer, 2 walls, 15% infill
Designer
7.8 h
1 plate
Mosspole 40mm Closed structure - 0.16mm layer, 2 walls, 15% infill
Designer
5.2 h
1 plate
Click to see more
Boost
95
180
30
5
196
173
Released
Description
A 3D printable modular mosspole that can be filled with sphagnum mos.
It exists of 4 pieces.
1. Mosspole with closed structure in the back (to keep moist in for longer)
2. Mosspole with open structure, for more aerea for plants to grow in
3. Groundpin
4. Top cap
Additional parts can be printed to extend the length of the mosspole!
Need a thicker / bigger mosspole? Check out my 60mm mosspole in the link below!
https://makerworld.com/en/models/148232
NOT FOR COMMERCIAL USE!!
Comment & Rating (30)
All
Boosted
Thank you very much! It turned out great! 🌱
Possible suggestion: Add a top cap with the possibility to screw on a 0.5L PET bottle for watering it. =)
The designer has replied
1
Reply
thanks! will look into adding some additions! like a slow dripping bottole etc. Still need to find the time to add zome additions (also a 40 to 60mm converter and visa versa)
1
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Great 👍
1
Reply
Print Profile
Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill
I already printed a few of these, they attach well with each other
1
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Printed great, I haven't tested the strength yet but looks good.
1
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Wife is happy with it. So am I.
The designer has replied
0
Reply
Nice one! Thanks for sharing!
(Edited)1
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Turned out great and looks fabulous. Have already printed more plus the extensions to keep all my plants happy.
0
Reply
Print Profile
Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill
Gedruckt via Handy = Super. Nochmal gedruckt via PC = Fehler.. weiß nicht wo das Problem war. man muss vorsichtig sein beim Druck. 166% Schnelligkeit macht der Turm nicht mit. Wackelt und fällt um. Maximal 100%. Auf die letzten Schichten besser nur 50
2
Reply
Brilliant, finally someone who has a round mosstab with a file that is half closed! What I'm still missing is a round base, because I use mineral substrate and the pointed base doesn't hold very well. At least that's my feeling. Also for smaller pots. Also a slow dripping watering system, then it's more than perfect. I like your design and hope you will eventually do more in that direction. Unfortunately I can't boost you anymore, but I'll catch up when I can!
The designer has replied
0
Reply
Thanks! I still do have plans to design some more attachments like a slow-drip system, a pot-base and converter from the 40 to 60mm mosspole and visa versa. Hit me up with the boost once you have it available ;) Thanks!
1
Reply
Print Profile
Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill
Langsam drucken, dann geht's. Frau ist glücklich. leider schafft der P1s es nicht, 3 auf einer Platte zu drucken. Hat mir die Türme umgerissen...
1
Reply
can you make availavle for the A1 mini?
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld