This docking station is made for the 3rd party multicharger for DJI Mavic 3 batteries.
You can find it on amazon:
Lyongtech multicharger for DJI Mavic 3
If the link doesn't work, don't worry: if you enter “multicharger for DJI Mavic 3” in the search you will find it!
You can charge 4 batteries same time. But I didn't like the loose cables, so I designed a docking station to fit the cables.
You will need
If you don't have Heat Set Inserts, you can probably also use a universal screw 3,5mm.
Print Settings:
If you wonder about the small gap around the screw-holes in the model: these are made to make the slicer creating more walls around the holes to strengthen these parts of the model.
Assembling:
Put the plugs into the bottom part as you can see here:
You don't have to cut off the caps of the plugs, so you don't risk you warranty.
Then put the other part on top and screw the two parts together.
License Notice:
“Noncommercial” means that you are not allowed to print and sell the model. This does not apply to companies that print this part as a service provider to a customer's order. You are also allowed to print the model to use in your own company.