Bambu Labs Hotend LED Colored Insert (Dual color available)
Remixed by
Copyright Claim
Bambu Labs Hotend LED Colored Insert (Dual color available)
Remixed by
Boost
15
28
7
Print Profile(2)
(Single Color) 0.08mm layer, 2 walls, 15% infill
Designer
17 min
1 plate
(Dual Color) 0.08mm layer, 2 walls, 15% infill
Designer
22 min
1 plate
Boost
15
28
7
0
53
37
Released
Description
This is a quick remix of Bambu Labs Hotend LED Coloured Insert from mobiobi.
The original model was 2mm thick so it didn't work well for non-transparent filaments. I shortened the depth of the front face to 0.5mm and added walls so the light inside the hotend is colored as well. The “height” of this insert was also changed from 5.47mm to 5.65mm to provide a tighter fit.
Additionally I've included a Bambu Studio 3MF file for single and dual color prints that is setup for transparent prints as outlined in this post.
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like and ★ Rate!
Comment & Rating (7)
All
Print Profile
(Single Color) 0.08mm layer, 2 walls, 15% infill
have the colour I wanted but was almost too tight of a fit and is slightly bowed in the middle
0
Reply
Print Profile
(Dual Color) 0.08mm layer, 2 walls, 15% infill
Leider etwas eng, musste etwas kleiner machen
0
Reply
Print Profile
(Single Color) 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
(Single Color) 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
(Dual Color) 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
(Single Color) 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
SingleColor 0.08mm layer, 2 walls, 100% infill
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld