Tin Tin Rocket by printchallenge

printchallenge

Props & Cosplays>Other Props & Cosplays

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

5.1 h

1 plate

4.8(46)

0.2mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

4.8(34)

100% - 70cm 0.2mm layer, 2 walls, 8% infill

11.7 h

4 plates

4.6(8)

0.2mm layer, 2 walls, 15% infill - A1 Mini verson

4.7 h

3 plates

Boost

133

184

111

584

747

Released

Description

I think this one is pretty easy to print…

just load the stl files and everything is correctly oriented. I printed in PLA with standard settings, no supports needed.

I started counting the rings from the bottom, so the second row is the second from the bottom and so on… The bottom white disks are in the bottom left corner on the build plate. The top white disks are in the top right corner:

grtz

Comment & Rating (111)

@steffen.scheit

That's probably not how it is supposed to be, right? Where did I get it wrong?

The designer has replied

@printchallenge

Hmm I updated the white parts and probably made a mistake… I scaled if by 90% but I forgot to reset it… so please print the white parts again but scale them up by 100/90=111% Or wait until I fix it, I will try to do it later tonight

@printchallenge

ok should be fixed now!

@TOSHIRTCOM

le résultat

The designer has replied

@printchallenge

Looks great!

@user_870772350

Top, fit perfectly, just missing the connexion cube. I Ve done a 14.6mm by 20mm and fit nicely .

@m_p_cameron

Boosted

This is an awesome model :-) I've added an A1 Mini version for those Tin Tin fans who own that printer.

@m_p_cameron

Boosted

Just printed your model. It's wonderful :-)

@ajeya

Boosted

Great model. Had to print the connecting piece separately from the "70cm" file, other than that, printed good and looks great!

(Edited)

@AF360

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

After I had glued it together I noticed that I did not align the little bulges to the three wings/feet of the rocket, my bad. Now the bulges are 90° off. (Maybe you could add some hint in the description or make a connector which does only allow connection in one of the correct rotations?) Anyway it's a great model. I adjusted the print profiles to use variable layer height and especially for the round feed and the top of the rocket I used 0.08 with a very smooth result!

(Edited)

@user_2169684344

Boosted

Love this model! Printed great and was super easy to assemble. Keep up the great work!

@user_3553463783

Print Profile

0.2mm layer, 2 walls, 15% infill

The edge between the two parts ia a little rough and it could have printed the connecting piece on the plate easily in my opinion. Other than that it looks crisp!

(Edited)