all made from scratch with fusion360, using svg files any similar uploads will just be using the same svg files and this nor they are copies of either persons work.

includes all versions you just need to select plate that you need or you can download the 3mf (or individual stls) from the raw file.

includes:-

couple

family of 3

family of 4

family of 5

family of 6

family of 7

family of 8

family of 9

1 child 1 parent

2 children 1 parent

3 children 1 parent

4 children 1 parent

my version of the family of bears puzzle i have seen requested a few times on facebook.

Can be customised with names in the slicer

,

i added names then changed type to negative part so it was indented,

but could also just add name on top.

these include tabs on the back to keep them together and are made to be very tight so may require a tap with a rubber mallet but i was able to connect them by hand.

they will stand on their own and stay together while stood and can also be wall mounted easily.

should scale up ok but not sure how well it will work scaling them down as the tabs will become weaker and tolerances tighter.