Silica box for Bambu Lab AMS, doubled contact area
Remixed by
Copyright Claim
Silica box for Bambu Lab AMS, doubled contact area
Remixed by
Boost
8
12
9
Print Profile(4)
PLA, 0.2mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
PETG, 0.2mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
ABS, 0.2mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
ASA, 0.2mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
Boost
8
12
9
1
37
36
Released
Description
Another Dry box or Silica-box for the Bambu Lab AMS.
By dividing it in 3 compartments the contact area is roughly doubled.
I took the measurements of the originals and redesigned it. The holes are back to horizontal, which prints a lot faster and bridging 10 mm distance is not a problem. A lip is added to the top to make it easier to remove the box.
Happy drying :)
Comment & Rating (9)
All
It fits perfectly!
Used Bambu Matte PLA Light Blue
1
Reply
Works Well Thanks
1
Reply
Print Profile
PETG, 0.2mm layer, 2 walls, 15% infill
Superb quality
1
Reply
Print Profile
ABS, 0.2mm layer, 2 walls, 15% infill
Tried a few but this one i like, very good job.
1
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill
No issues
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill
0
Reply
Boosted
Print Profile
PETG, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
PLA, 0.2mm layer, 2 walls, 15% infill
0
Reply
No more
Related Models
© 2024 MakerWorld