Fast printing Case for Arduino Mega with RAMPS 1.4
Copyright Claim
Fast printing Case for Arduino Mega with RAMPS 1.4
Boost
3
1
4
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
3.4 h
1 plate
Boost
3
1
4
1
6
2
Released
Description
I did not find a nice enclosure for a Ramps 1.4 so i made one.
You need 6 M3 x 10mm screws for the enclosure and 4 M4 x 15mm screws to mount a 80mm fan.
Its printable pretty fast as the enclosure is not really thick, still rigid enough for its usecase. Took me about 2 h on my X1C.
If you have any questions feel free to contact me!
Comment & Rating (4)
All
Boosted
Easy print, easy assembly, well aligned, mounting screw holes fit well with an Arduino Mega R3 and RAMPS 1.4 shield.
The designer has replied
0
Reply
thanks, glad you like it!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
even though it is thin it worked very well. I did have to modify the plug access holes a little.
(Edited)
The designer has replied
0
Reply
Thanks for the picture, yeah my goal was to build it with less material than other enclosures, still not too flimsy
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld