Heyho

Here I have various beads that you can use to make necklaces, bracelets or other decorations :)

Scalability
I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the opening, the easier it is to put the pieces together. So just print one or two test beads and check the fit before producing mass :D If the holes are too small, you can easily scale the beads larger!

Use Filament (TPU) instead of a cord!!! 100% 3D printing stuff!

You can also use a piece of TPU instead of a cord. Simply put the pearls onto it, add the shown clasp at one side and burn both ends a little until they melt and form nice balls. You can use some water to speed up the cooling process of the filament.

Clasps
To fasten the chains you can simply knot the ends together and hang them around your neck. Of course, there is a risk of strangulation with smaller children and the necklace must be correspondingly large in diameter. Alternatively, I have designed 2 more clasps to avoid these problems.

https://makerworld.com/de/models/56962

Colors
I printed several batches, each with a different color. The glow-in-the-dark ones went down particularly well with the children!

Remix Culture
There are of course many more shapes that are interesting! So I look forward to your remixes! Here's one of mine: diamond studs that can be attached to the chain!

https://makerworld.com/de/models/56960

Have fun!