V2 - Desiccant Spool Tumbler for SUNLU-Spools
Remixed by
Copyright Claim
V2 - Desiccant Spool Tumbler for SUNLU-Spools
Remixed by
Boost
38
90
38
Print Profile(3)
0.2mm layer, 4 walls, 15% infill
Designer
2.6 h
1 plate
PETG, 0.2mm layer, 4 walls, 15% infill
Designer
3.7 h
1 plate
PETG 0.16mm layer (Adaptive Layer, 3 walls, 15% infill
4.3 h
1 plate
Boost
38
90
38
8
188
172
Released
Description
V2 - SUNLU-Spool-Desiccant-Container
An updated version of my SUNLU-Spool-Desiccant-Container, wich is a remix of chuyskywalker´s “Desiccant Spool Tumbler” wich is a remix from Humebeam´s “Adjustable Spool Holder”
V2 saves 14g of Filament and around 43 min of printing Time with the PLA-Profile and 58 min with the PETG-Profile!!!!!
- The hexagonal venting Holes are now less deep (before 3.2mm --→ now 1.2mm) (thx for the Tip @markurian)
- The diameter of the Grips are reduced by 11.5mm
- The overall height of the Tumbler is reduced by 5mm
I use his Original for every Bambu Lab - Spool.
But I´ve a big ammount of SUNLU-Filament, and I thougt they need also one^^
Fit´s tight and holds a huge ammount of Desiccant-Beads.
Pls like my Model when you download it, and also the Original from chuyskywalker and Humebeam, they deserve it!
And please share pictures of your prints! :D
A Funnel for easy filling the Beads is now also available: https://makerworld.com/de/models/41194#profileId-41375
Comment & Rating (38)
All
Almost perfect. After first successful print I realized it doesn't fit to any of my spools. Scaled X and Y to 71% and it printed perfectly to fit in and holds smaller balls of desiccant too. Thanks for the model!
The designer has replied
1
Reply
Hi, this Spool-Tumbler was sized for standart SUNLU-Brand-Spools.
What Brand are your Spools?
If you send me the dimensions of the Inner Hole and the Width of your Spools, I´ll eventually do an extra Remix for this Brand!
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Passt perfekt auf die Sunlu Spulen und sieht super aus, einziger Kritik Punkt das die Gitter nicht immer perfekt sind aber liegt vllt an meinen Einstellungen.
The designer has replied
1
Reply
Habe mir gerade nochmal meine Tumbler angesehen, da sind die Gitter eigentlich immer perfekt.
War an der Stelle evtl etwas Schmutz oder Fett auf der Build-Plate? Manchmal reicht es schon, wenn man aus versehen mit dem Finger auf die Plate gefasst hat, so ging es mir zumindest schon öfters, besonders wenn die Kids am Drucker waren :D
(Edited)1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Amazing quality design, funnel is great addition that screws in too. love it. perfect fit to Sunlu spools.
1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Vervelend nice
1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
works as intended. good fit
1
Reply
Print Profile
PETG, 0.2mm layer, 4 walls, 15% infill
Perfect design for Sunlu spools. Nice, easy, clean print. Core has enough weight to allow the AMS to still function properly. Highly recommend. Thanks!
1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
perfect, thanks for the fix.
1
Reply
what's the OD of the inner tube? I have Sunlu Elite PETG filament and it came in cardboard spools not plastic :(
The designer has replied
1
Reply
it's 72,5 mm
0
Reply
Boosted
Great design, thanks for your work
1
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Perfect Print. Fits like a Glove. thanks for the Great work.
1
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld