Bambu P1P/P1S up to 12mm LED strip, three-sided mounting by Dieter W

Dieter W

3D Printer>3D Printer Parts

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

12mm LED 0.28mm layer, 2 walls, 5% infill

Designer

3.1 h

1 plate

5.0(7)

8mm LED 0.28mm layer, 2 walls, 0% infill

Designer

2.4 h

1 plate

4.7(7)

Boost

163

Released

Description

Bambu P1P/P1S 8mm LED strip, three-sided mounting (left side, front, right side), friction fit. No need to glue or screw on the printer housing. Glue the LED strip into the holder (two-sided adhesive tape) and press the holder into the housing. All three brackets are 250mm long.

You can combine it perfectly with the Nyx_NK Bambulab P1P/P1S USB LED switch. That's what I did, took the switch from Nyx_NK and made my own LED holder, works very well.

Printed in ABS with 0.28 layer height. Printing time 2 hours 20 min.

The COB LED strip and JST connector I used.

I don't know if it also fits the X1, if anyone tries it please write in the comments.

Update October 29th: Added a version for LED strips up to 12 mm wide.

______________________________________________________________________________

Bambu P1P/P1S 8mm LED-Streifen, dreiseitige Montage (linke Seite, vorne, rechte Seite), Reibungspassung. Kein kleben oder schrauben an dem Drucker Gehäuse nötig. Das LED Streifen in die Halterung reinkleben (zweiseitiger Klebeband) und die halterung in die Gehäuse reindrücken. Alle drei halterungen sind 250mm lang.

Man kann es hervorragend mir dem Schalter von Nyx_NK Bambulab P1P/P1S USB LED kombinieren. So habe Ichs gemacht, den Schalter von Nyx_NK genommen und meine eigene LED Halterung gemacht, funktioniert sehr gut.

Gedruckt in ABS mit 0,28 Schichthöhe. Druckdauer 2 Stunden 20 min.

Die von mir verwendete COB LED Strip und JST Steckverbinder.

Ich weis nicht ob es auch für die X1 passt, falls jemand ausprobiert bitte in die Kommentare schreiben.

Update 29 Oktober: Hebe eine Version für LED streifen mit bis zu 12 mm breite hienzugefügt.

Comment & Rating (18)

@AllanFonroques

Print Profile

12mm LED 0.28mm layer, 2 walls, 5% infill

I have an LED lighting system, but it is not perfect, the chain hits it regularly, I will try yours, thank you for the concept and for sharing. Thx for 12mm leds ;)

@Moth

Boosted

Print Profile

8mm LED 0.28mm layer, 2 walls, 0% infill

Printed with petg and is working great using the white USB LED strip purchased through bambus website with the printer. I'm really impressed with how the mounts are fit in place. I had to remove some clips holding cables to the front display as mine were located in different positions to what the left strip is designed to accommodate. Their location might be non standard.

@mariusc

Print Profile

12mm LED 0.28mm layer, 2 walls, 5% infill

@AllanFonroques

Hello, I would like to install your model, but my LEDs are 10mm, would it be possible for you to make a variant for 10mm LEDs?

The designer has replied

@DieterW

added a version for LED with a width of up to 12 mm

@AllanFonroques

Replying to @DieterW :

Thank you ;)

@user_3673048447

Print Profile

8mm LED 0.28mm layer, 2 walls, 0% infill

works

@m.t.m.

Print Profile

12mm LED 0.28mm layer, 2 walls, 5% infill

The idea is good, the print is excellent.. In the end, however, I designed my own low profile riser, this system didn't convince me. However, it is a personal evaluation, the press and the idea are excellent.