Rotating Jewelry Holder v3 - no supports & < 30 grams
Boost
68
97
30
Print Profile(1)
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
Designer
1.9 h
1 plate
Boost
68
97
30
3
181
180
Released
Description
Currently at its 3rd generation, the model is now support-free, for all the assembly. Weight is about 28.85 grams of plastic.
Assembly is incredibly easy and showed in picture 3, the base has a screw top, on which you should first insert the ring display and then screw the cap. That's it!
I tested this holder with BambuLab Silk PLA, a generic PETG and a generic PLA. All of them came out functional and stable.
Let me know if you like it!
Comment & Rating (30)
All
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
(Edited)
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
i really love this one!!
0
Reply
remixed it if you don't mind :)
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
works great!
0
Reply
The model was printed very well in Bambu PLA basic white according to the specified print profile. The tolerance of the thread would have to be increased slightly to make it easy to screw.
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
Very smart and quickly model!
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
Good Print, No issues at all.
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
heavily modified to suit my needs but it worked great.
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
Felt on the ground and broken… 😭. have to restart and probably try bigger
0
Reply
Print Profile
PLA - 0.4 nozzle, 0.16mm layer, 2 walls, 14% infill
It prints good No mess up
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld