Monarch Butterfly Lightbox by Love Prints

Love Prints

Art>Other Art Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

7.9 h

5 plates

Boost

Released

Description

**Please Rate our Print Profile/Design When complete **

**good or bad we like to know**

Monarch Butterfly

Lightbox

Fanart inspired

We Recommend - UK COB LED strip: COB LED's

Orange is printed at various thickness to provide shading on wings

All of our models are available in 3MF Format

You can change the colour with ease

You can change the size with ease

We also include STL Files for those without a Bambu Labs Printer

Additional Files included:

White Diffuser

Hanging Rear Plate with Cutout

Rear Plate

Rear Plate with Cutout

3.6mm Inserts

Print Face Down on a Textured PEI Plate for best results

Please check out our other designs

https://makerworld.com/en/u/2913704375?orderBy=downloadCount

If you are feeling generous you can buy a coffee:

https://www.buymeacoffee.com/cariadprintsltd

https://www.paypal.com/donate/?hosted_button_id=Y5FCT47XB5C9Y

Comment & Rating (3)

@cfelix2k

It printed beautifully but assembling the antenna area is super difficult when printed on my X1C. I'm hesitant to try and assemble until all of the LEDs are installed as I don't think I could get the front and back apart afterwards.

The designer has replied

@LovePrints

It’s made with a tiny tolerance between the two,so it works and holds with a push fit. can slightly debur the inside edges to help it go together a little easier as well

@user_4261137228

what kind of lights do i use with this?

No more