Attach your Ikea Skadis to walls or furniture without having to drill holes.

You can use Tesa Powerstrips tape or any kind of alternative adhesive tape for the same purpose.

Warning! Please use the appropriate tape and for the appropriate weight, otherwise you risk finding your Skadis & things on the floor!

2 width versions (both 5cm in length):

• 21mm wide for single tape
• 42mm wide for double tape.

For other sizes, change the parameters in the F3D file.

The hooks are a tight fit, so they can stay in place when you lift the board and install it, also for when you want to add, remove things from the board. However, in the parametric version, you can adjust tolerances!

Printing:

Print with supports.

I strongly suggest printing on the side for increased strength of the hook! Also, use a cube modifier with 100% infill for a few layers and the hook.

Installation:

1. Put the Skadis board on the table and place 4 hooks in corners
2. Attach adhesive tape to the back of the hooks
3. Lift the Skadis board, carefully align it where you want to install it and press
4. Apply force in the area of all the hooks, so that the adhesive does its job