Another wall light - this one is part of a set I am designing to link in with an Arduino controller to act as a turn indicator for Starwars based table top games (Legion, Armada and X-Wing)

I haven't printed this yet as I am waiting on the Red filament arriving - once I get printed I will share a few pictures

I have also included an optional stand if you don't want to mount it on the wall

My settings for printing are the 0.2mm standard on Bambu slicer with a couple of tweaks:

1. Fuzzyskin - Contour 0.4mm distance and 0.1mm thickness
2. No Brim
3. Wall Generator - Arachne
4. increase the flow ratio slightly - go from 0.98 up to 1.05

Use a Textured PEI Plate and you should be all good

For lighting on all of my light boxes I am using a USB powered LED light from Amazon with a bluetooth controller allowing me to control from my phone