Case designed to protect and hide an airtag device from view and to be able to have your scooter located without anyone noticing. Avoid thefts and losses in the simplest way
Instructions:
Layer height: maximum 0.28, recommended 0.2
Top and bottom layers: 4-5
Walls: minimum 2 but recommended 3
Infill: 40% gyroid or similar
Supports: base only
Weight: 12 grams approximately
Material: Print in TPU so that it fits well with the screws
Print time with CR10 V3 0.4 nozzle: 1 hour 27 minutes
Carcasa diseñada para proteger y ocultar de la vista un dispositivo Airtag y poder tener tu patinete localizado sin que nadie se de cuenta. Evita robos y perdidas de la forma mas sencilla.
Instrucciones:
Altura de capa: máximo 0.28, recomendable 0.2
Capas superior e inferior: 4-5
Paredes: mínimo 2 pero recomendable 3
Relleno: 40% giroide o similar
Soportes: solo en la base
Peso: 12 gramos aproximadamente
Material: Imprimir en TPU para que se adapte bien con los tornillos
Tiempo de impresión con CR10 V3 boquilla 0,4: 1 hora 27 minutos