Estinien's Endwalker Corrupted Gae Bolg

Dangerous Ladies' 3D models for Estinien Wyrmblood's Corrupted Gae Bolg lance.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a 250mm tall tall bed, with internal dowel slots for strength and keys for alignment. Finishes at 102".

Tail Blade:
Assembles with a 6.75” long piece of 1/4” dowel. You may want to use aluminum or steel instead of dowel to add a bit of extra weight to counter-balance the head and give it strength. Consider printing the tail blade with really dense infill and triple-thick walls as well; you’ll want to rest the lance on its end while standing/posing, and making it extra durable will make it safer to lean. It will also counter-balance the weight of the head nicely.

Head:
Assembles with an assortment of printed keys, as well as four 1/4" dowel pegs for the wings. I suggest printing the blade tip really durably to give it more strength if you put it against the ground.

Handle:
57.5” of 1” dowel. If you want to put a break in it, I suggest putting it where the middle part of the handle is, where the wire starts!

Wire:
The red wire can be made with 1/4" aquarium tubing, or similar.

If you want to use a 3/4” PVC pipe instead, print everything at 103% scale. I suggest printing ONE piece first and taking it with you to the hardware store to test the fit; different PVC is made with different wall sizes and is measured by its inner diameter. (Hence a Schedule 40 3/4” PVC pipe having an outer diameter of just a hair over an inch.) Schedule 40, Schedule 80 and Class 200 PVC pipes should all have an outer diameter of 26.67mm but if your printer is not super fine tuned you may want to print at 104% or higher to give yourself a tiny bit of wiggle room.

Files include:
- Photos
- .STL files

We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies