The Mercedes-Benz W154 raced in the 1938 and 1939 Grand Prix seasons and won the 1938 European Championship with Rudolf Caracciola at the wheel. Individual race wins included the French, German and Swiss Grand Prix in 1938 (three different drivers) and the Belgian, German and Swiss Grand Prix in 1939.
BONUS: The car is pictured with show wheels and tires, not legal for racing. Models are included for the show wheels and tires, in case you'd like to use them. (The larger tires obviously are intended for the rear.)
IF YOU LIKE THIS MODEL, check out the amazing build by NICK04 on Cults.
What is a "pinewood derby car shell"?
A pinewood derby is an event created by the Boy Scouts many years ago. Each scout is given a pinewood derby kit typically consisting of a block of wood with slots for axles, 4 wheels, and 4 nails to be used as axles. The scout (and his dad, usually) will then carve the block of wood into the shape of a car, paint it and apply stickers, install the wheels on the axles, and then race it at the "derby", which involves a sloped track with a timekeeping apparatus.
An official scout derby will usually require that the parts in the kit be used for cars entered in the derby. Other organizations (including workplaces) often hold derbies, too, and some of them require the use of the parts in the box, including the block of wood.
These "pinewood derby car shells" are intended to be used with an official derby wood block, cut down to size, along with the axles and wheels included in the kit. A printable model of the shaped wood block is provided. You can either use the printed model or use it to accurately cut an official wood block down to size.
Notes:
Car body: Supports are required. You can choose to print "Body.stl" and add your own raft, or you can print "Body with miniraft" for a minimal raft-like surface that will aid in keeping the supports adhered to the build surface.
Windshield: I printed this using clear PLA in vase mode. A model with miniraft is supplied, since the part is so small.
Exhaust pipes: Plain versions are provided as well as with a "miniraft", to provide something for the supports to stick to.
Wheels: The wheel model has a miniraft. Be sure to add supports.
Seat and steering wheel: Best to print these with a brim.
I printed everything using a 0.4mm extruder. The grille looks pretty rough and would probably look a lot better if you print it with a 0.3mm or smaller extruder.
Everything else is pretty simple and straightforward to print, with minimal or no supports/rafts/brims.
Smoothing
This car was smoothed with 3d printing resin and baby powder. You can find videos and guides online that describe the process, but here it is in a nutshell:
You can add tungsten weights to the hole in the rear of the body. If you plan well, and use enough infill, you can maximize the weights and end up right at 5 oz.