V1.1 Update

• Added a 3 high stand
• Reduced diameter of stand pins from 5.9mm to 5.8mm to allow for easier installation as requested

Also adding in here that you only need to print 1 plate of the stands. I have included 1x height, 2x height, and 3x height so that you can stack the white displays, but there is no need to print the other height versions (ie. if you want a 2x height, no need to print the 1x and 3x stands)

Benchy Display Shelving unit

I designed this with rough influences of other display units that I've seen floating around. I have printed a Benchy, plus a Mini Test Print card for each filament that I have used, so I wanted some way to integrate showing off both of these in a simple to print, neutral display shelf.

The display shelf is 250mm long and fits 5 Benchy's and 5 corresponding Mini Test Print cards. I have angled the benchy for a more aesthetic look vs other display units that are either profile or directly head on. Benchy is sunk 5mm into the display stand for securing it in place with a 0.15mm gap for the loft.

The display shelf can certainly stand alone on any surface, but I have also developed stands that you can slide the display shelf onto with 2 pins. The bottom display shelf will fit tight to hold the stand from skewing, and you can either print a single height stand or a double height stand.

I have also included simple X clips for linking several of these display shelves in a horizontal manner.

Last but not least I have included the 5mm tall Benchy Loft profile as a STP file for download in the event that you want to use it to subtract from your own 3D model and don't want to loft it yourself.

NOTE:

I take zero credit for the models of the Benchy and the Mini Test Print. I have included them in the 3MF file for the sole purpose of having an easy print from the file and to ensure that the models that you are printing are the ones compatible with the display stand. I have made zero changes from the originals and as such have not included them in the separate file download section. The link to the Mini Test Print original is here: https://www.printables.com/model/271350-mini-all-in-one-printer-test