Japanese Nature Landscape Hueforge
Copyright Claim
Japanese Nature Landscape Hueforge
Boost
334
607
70
Print Profile(2)
4 colors 0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
200mm height, 0.04mm layer, 1 walls, 100% infill
5.4 h
1 plate
Boost
334
607
70
6
880
369
Released
Description
Swap Instructions (if you do not have AMS):
Start with black PLA Basic | Bambu Lab EU
At layer #6 (1.20mm) swap to Red PLA Basic | Bambu Lab EU
At layer #9 (1.80mm) swap to Pink PLA Basic | Bambu Lab EU
At layer #12 (2.40mm) swap to White PLA Basic | Bambu Lab EU
You can scale up and down but only X and Y. Z axis must remain the same as original
Comment & Rating (70)
All
I printed two one at 100% and the other scaled to 200% XY and the both look great! Just need a proper red filament in the future. Also printed without AMS with instructions in description.
(Edited)
3
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
beautiful print!
1
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
going to tinker with the colors when I get home.
1
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
Great Thanks
0
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
fav cute
0
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
Very Cool! Thanks for Sharing!
0
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
perfekt easy to print
0
Reply
Print Profile
200mm height, 0.04mm layer, 1 walls, 100% infill
nice easy print
0
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
thx
0
Reply
Print Profile
4 colors 0.2mm layer, 2 walls, 15% infill
i didnt have pink color so instead i used red. Amazing hueforge thx
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld