UPDATE BELOW 27/01/24

Fast and easy print with the AMS with 4 colors

Printed by prefence on a structured PEI plate, all plates are facing down in the 3mf file, so you have the structure of the PEI on the print, what is nicer.

Colors of the dragon is at own choice.

I added a rooftop in Chinese theme as a profile or download the stl here:https://makerworld.com/nl/models/128446#profileId-139061

For plate 3 with de chinese dragon sign i added a black dot, this must be placed at the bottom right of the back. So the sign is facing correctly

Instruction:
3MF file is ready to print.
all other files are 5 different plates
Plate1:
- PL1Dragonblack.stl
- PL1Dragonorange.stl
- PL1Dragonred.stl
- PL1Dragonyellow.stl

Plate 2:
- Pl2yellow.stl
- PL2Black.stl

Plate 3:
- Pl3dragon.stl

Plate 4:
- Back.stl

Plate 5:
- holdelonger side.stl
- holdercap.stl
 

All my shadow boxes ar compatible with each other.

UPDATE 27/01/24

I added 2 new holders (standcloseback.stl, Standlongersidev2.stl)

Standlogersidev2 i make the front sides a little larger so the sides wiggle less while printing. the sides still slant slightly due to printing, which is why I also added the other holder with a closed back. The disadvantage is that when placing a light source at the back, no light can pass through :-)

Both holders have slighly largers inserts.

Added also  the print profiles for both.

Have fun printing them en go check my other models.

Commercial use: https://thangs.com/designer/Kevyn3D