Moai Salt & Pepper Shaker + Tray
Remixed by
Boost
15
23
17
Print Profile(3)
0.1mm layer, 3 walls, 15% infill
Designer
2.4 h
1 plate
0.1mm layer, 3 walls, 15% infill
Designer
2.4 h
1 plate
0.07mm layer, 3 walls, 15% infill
Designer
1 h
1 plate
Boost
15
23
17
1
63
101
Released
Description
This is a Salt & Pepper Shaker in the form of a “ MOAI ”
with a Tray
You can print without support !!!
Printer : Flsun V400
Walls 3 ; top 4 ; bottom 4
layer height : 0,1 line width : 0,6 – Shaker
layer height : 0,07 line width : 0,4 – Tray
infill 15% ; no support ; print time ~ 2 h 35min Shaker , 1h 9 min Tray
Sunlu Silk Gold & Silver & Blue PLA+
My Models : https://www.printables.com/de/@CB_384764/models
MakerWorld : https://makerworld.com/en/u/1233649057
Comment & Rating (17)
All
Print Profile
0.1mm layer, 3 walls, 15% infill
Great print and design!! I would only enlarge the holes a little to make it perfect (I personally modified them later)
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
Great work ... thank you
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
parádní kořenky jen jsem si musel poladit velikost víčka (závitu) trochu zmenšit oproti slánce.
není to ale žádný velký problém, jinak solí a pepří :-)
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
It will be a gift for friends who already visit the Moais on easter islands. They will like it.
Good work. Thank you
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
Strength Issue
0
Reply
Print Profile
0.07mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.1mm layer, 3 walls, 15% infill
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld