Replacement canvas and curtain holder for Starcraft popup camp trailer. I wasn't able to find these anywhere, so I tried designing my own. For a longer strip, just print as many as you need (these are roughly 6" long), and connect them together after printing with ABS Slurry to create the longer strip.

I added 2 pads on the bottom as I am printing with ABS and didn't want it pulling up and warping. These will need to be cut off prior to installation. I uploaded a version without the tabs as well.

I added a "bump" on the line where the screw holes would ordinarily be. Just drill through with a 11/64" drill bit and it should be the same size hole as the original strip.

LulzBot

Yes