Vancouver Canucks Coaster Set by NewfoundPrints

NewfoundPrints

Household>Decor

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Description

Model

Made to be printed face down on a textured plate, giving it a nice top finish.

These are designed to be used with a 2mm thick, 100mm diameter cork coaster with adhesive backing. I used these ones:

https://www.amazon.ca/dp/B08XZ4VM36?psc=1&ref=ppx_yo2ov_dt_b_product_details

I print these as a set of 4 and have included a holder as well. For the bottom of the holder I use these rubber stops:

https://www.amazon.ca/dp/B093DHDM8F?psc=1&ref=ppx_yo2ov_dt_b_product_details

Both the cork and the rubber stops give the coasters a nice feel, and help to prevent any sliding around.

Main print settings:

Layer height: 0.16

Infill: 40%

Infill Pattern: 40% (this is to ensure a smooth backing)

Infill/wall overlap: 60%

***If using the above cork backings, please ensure to scale X & Y to 100mm ONLY. Do not scale Z***

Comment & Rating (4)

@37mdmp

sweet, will try this in the next day or so. just waiting on my riser piece to complete thanks a bunch

The designer has replied

@NewfoundPrints

no problem, please let me know how they turn out!

@37mdmp

Replying to @NewfoundPrints :

so they came out almost perfect, im newer to some of these programs so im not sure if i did it right but with the 4 raw files in the studio i had to line it up by dragging them together the best i could and then used the assemble feature to make them into one. once printed i see a tiny line/gap between the logo and coaster but its not big. i still liked the outcome of the print. Is there something im missing to align these all up perfectly?