X1C - P1 Top Glass Riser by Officina23

Officina23

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Corner Glass Riser (two colors) - 0.4mm nozzle

Designer

1.4 h

1 plate

5.0(7)

Corner Glass Riser (single colors) 0.4mm nozzle

Designer

1.3 h

1 plate

4.9(19)

Print on A1 mini - 0.24mm layer, 3 walls, 15% infill

2 h

1 plate

Boost

107

125

Released

Description

After using my perimeter version of the X1C top glass riser for several months (you can find it by clicking here), I designed this variant consisting only of the four corners which therefore does not require any connectors for assembly and has a very short printing time.

You will find two printi profiles for this riser: the main one is to make it in two colors (as in the photo), the other is to print the corners in one color.

Comment & Rating (38)

@hookuum

Print Profile

Corner Glass Riser (single colors) 0.4mm nozzle

Perfect fit and the extra space is ideal. Thank for sharing.

The designer has replied

@Officina23

Thank you - I see you have a lot of extra space above the printer, well done! ...and I see you printed it in PLA Galaxy, right? I have yet to try it but I already like it!

(Edited)

@hookuum

Replying to @Officina23 :

Usa

@hookuum

Replying to @Officina23 :

Flashforge petg in burnt titanium

(Edited)

@verdemarcomaker

Boosted

Print Profile

Corner Glass Riser (two colors) - 0.4mm nozzle

the fastest riser to print... for now I'll leave it like this but in future I'll have to print a more complete riser to add the LEDs. good job. the lightest and fastest to print

The designer has replied

@Officina23

Thank you, being able to print it in a short time was the primary objective of this riser. (...magari potevo risponderti in italiano?)

@verdemarcomaker

Boosted

😂 piu che la velocità non avevo nemmeno abbastanza filamento per stampare il riser completo. ma ti dirò forse lo lascio cosi... vediamo se riesco a mettere una buona illuminazione sopra il vetro ... l'unico dubbio che mi viene è se magari al centro dei 4 lati non ci starebbe un altro "zoccolo" per sorreggere il peso? ho paura per il vetro